Turning The Dash Camera Unit On/Off; System Reset - Binatone DC200 User Manual

The adaptor is also compatible with 24V DC sources, as found in many heavy goods
vehicles.

Turning the dash camera Unit On/Off

Your dash camera will power on and start to record automatically as soon as it is
connected to power, and will shutdown automatically once it disconnect to power
over 10 seconds.
You can also power it on and off manually. Press the On/Off button for 1 second to
power on, press and hold the On/Off button for 2 seconds to power off.

System Reset

Under extreme circumstances it may be necessary to reboot the system. Reset the
system if the following situation occurs:
 Long delay experienced with screen refresh rate or operation, resulting in an
inoperable unit.
 The system will not turn off with the power button.
 No response with press button.
The reset button can be found on the top of the unit. Insert the tip of the stylus pen or
small blunt implement into the reset hole in order to press the button. The system will
be immediately reset.
Technical Help – Please contact the helpline on 0844 557 9677
QUICK START GUIDE
10