Table of Contents
Advertisement
15 Notes of Schematic Diagram
(All schematic diagrams may be modified at any time with
the development of new technology)
Notes:
S1000:
ID SET switch.
S1000:
POWER switch. (
S1200:
PLAY switch.( )
S1201:
STOP switch.( )
S1202:
CH + / RWD switch.( )
S1203:
CH - / FWD switch.( )
S1204:
SELECTOR switch.
· Importance safety notice :
Components
identified
characteristics important for safety.
Furthermore, special parts which have purposes of fire-
retardant (resistors), high-quality sound (capacitors), low-
noise (resistors), etc. are used.
When replacing any of components, be sure to use only
manufacturer´s specified parts shown in the parts list.
· Capacitor values are in microfarad(µF) unless specified
otherwise, F=Farad, pF=Pico-Farad
Resistance values are in ohm(Ω), unless specified
otherwise, 1K=1,000Ω, 1M=1,000KΩ
· Voltage and Signal lines:
: +B signal line
: -B signal line
: Main signal line
: RF signal line
Special Note :
· This model uses Switching Mode Power Supply (SMPS) for
providing necessary voltages.
· There is no schematic drawings included in this document
for the SMPS Module.
· It is advisable to replace the SMPS module as an assembly
unit.
/
)
by
mark
have
special
49
SH-FX85P / SH-FX85PC
Advertisement
Table of Contents
