Table of Contents
Advertisement
Earplug Insertion
•
Improper fit of this device will reduce its effectiveness in attenuating noise, consult
the enclosed instructions for proper fit
•
Inspect the earplugs before each use (the earplugs should be free of debris, tears,
and other physical damage)
•
Inspect Communications Earplugs and attachment to earplug (the Communications
Earplug housing is properly mated to the earplug when it cannot be pushed into the
earplug any further)
•
Lubricate earplugs with water or Aegisound Ear Gel along the earplug canal, if
preferred
•
Gently insert the tip of the earplug into ear canal with the "R" (right ear) or "L" (left
ear) at the bottom of the ear canal, facing downward
•
Push earplug in until the earplug is fully seated (there should not be gaps between
the earplug and the perimeter of the ear canal, as shown below)
•
The Communications Earplug housing can be rotated to orient the cable straight
down or over the ear
Acclimating to Custom Earplugs
•
Begin by wearing earplugs for one hour at a time for the first several days
•
Once acclimated to your earplugs, increase the wear time until
they are comfortable for longer durations
•
Wearing custom earplugs for long periods of time might require
an adjustment period
|
4
LPCCE
Letter
Pointing
Down
Advertisement
Table of Contents
