Nielsen CT4541 Original Instructions Manual page 8

OPERATION
Always use with caution! Do NOTcover the ventilation openings duringuse as
it causes a risk of burns!
Do not touch the hot nozzle!
Temperature settings:
With the temperature switch you can selectfrom two temperature settings. Depending
onthe application, you can use the followingsettings:
Setting I: 50℃ (cooling)
Setting II: 600℃
The volume of air in each setting 500L /Minute
To turn on the power:
–Slide the switch (1) to position II, depending on the application
To cooling the device:
–After working with the device at high temperature setting (position II), the device is
getting very hot. So it is suggested to slide the switch (1) to position I,to quickly cool
down the devicebefore turn off and device for storage.
To turn off the appliance:
–Slide the switch (1) to position 0. The unitis switched off.
To install the nozzle:
The nozzles can easily be pushed over the hot air nozzle. Never touch the nozzles during
orimmediately after use of the device. Thenozzles are very hot.
MAIN FUNCTION: WEED BURNER
Assemble the extension handle
The extension handle consists of two parts.Click to connect both parts.
Now attach the extension handle to the device.
Make sure that the extension handle firmlyclicks into position. If using the device as aweed killer you must
use the extension handle.
Hold the weed killer firmly by holding the endof the extension handle.
Use:
• Ensure the extension handle is firmly fixedonto the device and that the device isturned off.
• Install the weeding nozzle (8) to the device.
•Connecting to power supply and insert the plug into the power socket
This product is designed with a cord retainerthat prevents the power cord from
beingpulled loose while using.If using the device as a weed burner you must
make sure the power cord is retained by the cord retainer in the way shown in
Fig. 14before plug into the power socket.
• Check to ensure the nozzle is not blockedbefore turning the device on.