Suzhou Kunteng Electronics KT-LCD6 User Manual

KT-LCD6 e-Bike Display User Manual
Dear customer, please read this manual before you use KT-LCD6 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.

Functions and Display

Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1 UP button
2 SW button
3 DOWN button
4 Battery Capacity Indicator
TM Single trip time
5
TTM Total trip time
KM/H Riding speed(metric)
MPH Riding speed (imperial)
6
MXS MAX speed
AVS Average speed
7 ASSIST Pas level
8 CADENCE display
KM Distance(metric)

Operation

1. ON/OFF
Hold button long to turn on the power, and hold
power. When the motor stops driving and when the e-bike is not used for a consecutive 5 minutes, it will
automatically shut down and turn off the motor power supply.
Mil Distance (imperial)
DST Trip distance
9
ODO Total distance
VOL Battery voltage
10 Backlight and headlights
11 The brake display
CRUISE Cruise function display
12 PAS PAS starting display
THROTTLE Turned on throttle
13 6KM/H push power assist
MOTO ℉ ℃
Motor temperature
14
MOTOR W Motor Power
℉ ℃
15 Environment temperature
long for a second time to turn off the

2. Display 1

V1.0
Hold

2.1 Turn on backlight and headlights

Hold
should have headlight drive output function); hold
the backlight and headlights.

2.2 Assist ratio gear (ASSIST) switch

Hold
minimum power, gear 5 is for the highest power. Each startup will automatically
restore the gear shutdown last time (the user can set randomly). Gear 0 is
without booster function.

2.3 6KM/H power assistant push function

Hold
more than 6Km /h. Release
2.4 Cruise function(CRUISE)
After the cruise function is turned on, the trip riding speed is greater than
7 km/ h, hold
any button to cancel.

2.5 Turned on throttle (THROTTLE)

Turned on throttle, the display interface shows THROTTLE.

2.6 Power-assist startup

When the booster riding, the display interface shows PAS.
button long to start up and enter display 1.
button long to turn on backlight and headlights (the controller
or button shortly to switch 1-5 file gear. Gear 1 is for the
button and flashes, the vehicle drives at the speed not
button, the function is invalid.
button long and enter cruise, the CRUISE lit. Brake or hold
long again to turn off