Product Overview; Using A Mains Adapter; Using Batteries; Connections - Currys Essentials CPERCD11 Instruction Manual

PRODUC T OV ER V IE W
1
2
13
1 Earphones Socket (PHONES) 8 Skip Search Forward Button
Volume Control Program Button (PROG)
2 9
DC IN Socket Skip Search Backward Button
3 10
LCD Display Stop Button (Power Off )
4 11
CD Door Mode Button (PLAY MODE)
5 12
Play / Pause Button (Power On) Open Switch
6 13
Random Button (RANDOM) Battery Compartment
7 14
U SING A MAINS ADAPTER ( NOT SUPPLIED)
1. Connect the power cable to
the DC 4.5V socket of the CD
player.
2. Plug in the mains adapter to
the mains socket.
U SING BAT T ERIES ( N OT SUPPLIED)
1. Open the battery compartment cover at the
bottom of the unit.
2. Insert two alkaline batteries, size "AA" (LR6).
Install the batteries correctly by following the
polarity (+ and -) indications in the battery
compartment.
3. Close the battery compartment cover.
For battery operation, the mains adaptor cable must be disconnected from the
mains socket and the DC IN socket.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
• Use only the types of the batteries which are indicated in this manual.
• When the batteries are exhausted, the unit will not function. Replace both batteries
at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of
batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance
with local regulations.
GB-1
CO N NE C TI O NS
Listening with the Earphones
Connect the stereo earphones (supplied)
to the (green) earphones socket (PHONES)
3
on the unit.
4
5
6
7
8
9
10
11
12
O P E R ATI O N
Inserting a CD
1. Open the CD door by sliding the OPEN button.
14
2. Place the CD firmly on the central spindle and close the CD door.
Playing a CD
1. Press the button to Play / Pause.
2. Adjust the volume control.
To stop play, press the button. Press the
To
Pause play
Resume play after pausing
Move to start of current track
Move to start of previous track
Move to start of next track
Move to start of later tracks
Fast forward
4.5V ( )
Rewind (fast)
DC socket 3.5mm
Removing the CD
Remove the CD by opening the CD door, holding the centre spindle and lifting out
the CD.
This device does not have anti-shock. If you jog this unit play might be temporarily
interrupted.
OTH ER F U NC T I O NS
To Play Tracks Again (Repeat Play)
You can play tracks again in either normal or program play mode. You can repeat all
the tracks or just one track.
To Repeat Single Tracks
Press the PLAY MODE button once while listening to the track you want to hear again.
The " " symbol will appear in the display.
• To repeat another track, press the
• To cancel repeat play, press the PLAY MODE three times.
To Repeat All Tracks
Press the PLAY MODE button twice during play. The "
display.
• All the tracks will be repeated one after another.
• To cancel repeat play, press the PLAY MODE button two times.
button again to turn off the power.
Press Display
Once
More than once
Once
More than once
Press and hold
Press and hold
or button to skip / search.
" symbol will appear in the
GB-2
OT H E R F U NC T I O NS
Intro Play
1. Press the PLAY MODE button 3 times to enter the intro mode, "INTRO" flashes
on the display.
2. Press the PLAY/PAUSE button, CD will play the first 10 seconds of each track on
the CD.
3. Press the PLAY MODE button once to cancel intro playback and resume
normal playback.
4. Power is turned off automatically after 30 seconds, when all tracks have been played.
Random Track Play
While the unit is not playing, press the RANDOM button once, "RAND" will appear
in the display. The unit will then play tracks at random.
To cancel random track play, press the RANDOM button once.
Play Tracks in the order you want (Program Play)
You can program the playing of up to 24 tracks in the order you decide.
1. While the unit is not playing, press the PROG button until "PGM" flashes in the
display. The track number and order of play will appear.
2. Press the or buttons to skip / search to choose a track.
3. Press the PROG button to include the track in the program.
4. Repeat steps 2 and 3 to program all the tracks you want.
5. Press the button to play / pause. The "PGM" symbol stops flashing, and the
unit plays your chosen tracks in the order you specified.
6. To cancel program play, press the button or open the CD door.
To Check the Programme
Each time you press the button during program playback, the next track
number in the order you specified appears.
MA I N TE N A NC E
Cleaning the Exterior of the Unit
• Wipe with a soft cloth. If the unit is very dirty, moisten the cloth with a weak
solution of non-caustic detergent and water.
Handling Discs
• Do not touch the playback side of the disc.
• Do not attach paper or tape to the disc.
Cleaning Discs
• Fingerprints and dust on the disc cause sound deterioration. Wipe the disc
from the centre outwards with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a
slightly moistened soft cloth and finish with a dry cloth.
• Do not use any type of solvent such as thinner, benzine, commercially available
cleaners or antistatic spray. They may damage the disc.
Playback side
Storing Discs
• Do not store discs in a place subjected to direct sunlight or near heat sources.
• Do not store discs in a place subjected to moisture and dust such as a
bathroom or near a humidifier.
• Storing discs vertically in a case, stacking discs or placing objects on discs
outside of their cases may cause warping.
GB-3