Rosen DVD Player Owner's Manual page 20

Rosen G8 Owner's Manual
DVD TYPICAL SETUP AND CONFIGURATION
The following section explains how to customize various features of
the Internal DVD Player, including various language, display, and
parental control features.
Note: Many DVD menu settings do not apply to this system,
since it is specifically engineered for automotive use.
Changing the state of some settings can cause apparent
system failure. Don't change any settings other than those
described in this section.
A DVD disc must be loaded to access the Internal DVD settings.
1 Press SOURCE SETUP.
2 Use the Left and Right arrow buttons to select a page.
3 Use the Up and Down arrow buttons to select the setting to
change.
4 Use the Left and Right buttons again to change the value of the
setting.
:
20
Changing the Aspect Ratio Mode
This is under the SYSTEM SETUP tab,
under TV TYPE. The correct setting is
WIDE. Changing this setting to NORMAL/PS
or NORMAL/LB will result in distorted
video.
Changing the Video Output Mode
To change the video output mode, select
SYSTEM SETUP, and then select TV
SYSTEM. The default is NTSC. If you want
to be able to play PAL discs on your NTSC
monitors, select PAL. If you change this
setting and the picture "rolls", see your
Rosen dealer.
Note: The setting "AUTO" will automatically output NTSC
video from NTSC discs, and PAL video from PAL discs.
NTSC is the North American standard. Some discs may
not play properly when AUTO is selected.
The Digital Output Setting
There is a setting in the menu for a Digital Audio output under DIGITAL
SETUP. This unit does not have a digital audio output. Leave this
setting in the ANALOG mode.
Note: Enabling the Digital Audio mode disables the analog
audio output used by the FM Modulator and the IR head-
phones, and can resemble a system audio failure.