Updating The Navigation System With The New Application - TomTom NB1 Owner's Manual

Updating the navigation system with the new application

After the new application version has been put onto the SD-card, you need to update the
navigation system. Do the following:
1. Insert the SD-card into the navigation system and close the door.
Tip: Do not use force to insert the SD-card. Make sure that the SD-card label is visible
when inserting the card.
2. Turn the ignition key to the accessory setting to turn the radio on, but not start the engine.
3. After approximately 10 seconds, press the NAVI button to see the navigation screen.
The following screen should be shown:
After about 1 minute the screen changes to the following screen. After the given time the
update starts automatically.
10.815
10.815
41