Table of Contents
Advertisement
message appears:
Press Esc for Boot Options
2.
Wait for the message to disappear.
3.
Follow the instructions on the screen.
(The following steps are required only when switching on the device for the first time after
Delivery.)
4.
Make the region and language settings.
5.
Type in the product key as required.
meeting.)
6.
The installation of the operating system is complete.
2.8 Digital Input & Output (Slim SKU only)
Only U-BPC Slim version supports DI/O channels designated DI0~DI8 & DO0 ~ DO8.The connector type
is a plug-in screw terminal block that enables you to connect to field I/O devices directly without
additional accessories. Whether the high voltage range is the triggering mode or normal mode
depends on the design of the device. Quite often the logic level 1 (high voltage) is used to indicate the
triggered event, but not always. The following sections descript the technical data of DI/O. Before
starting using DI/O, ensure to check the connection type of your DI/O devices to connect.
2.8.1 Digital Input
Connection
DI
Connection Design
Voltage
Rigger (low)
Normal (high)
Current
(Check product key location in label while reviewing
▲ Figure: Digital Input Terminal Block
TTL (Transistor-to-Transistor Logic) compatible logic levels
Or Transistor (open collector)
Or relay
(check w/ EE)
Logic level 0:
(check w/ EE)
Logic level 1:
(check w/ EE)
- 16 -
Advertisement
Table of Contents
