BASIC OPERATION Settings Up Mains To run the radio from mains power follow the below instructinons. Connect the DC mains plug to the DC mains input socket on the rear of the unit. Connect the plug of the adaptor to a mains outlet and switch on. Note: The DAB+ radio station list is stored in the memory and so the next time you switch on your radio on, the station search does not take place.
Tune to a DAB+ preset station In DAB+ mode 1. Press and release the Preset button, Preset Recall s1 is displayed and the name or frequency of the station stored there, or 'Empty if no previous station has been stored 2.
TROUBLESHOOTING Problem Reason(s) Solution(s) No Power The Power switch is set to OFF Set the Power switch to the ON position Batteries are flat Replace the batteries or use mains power Desired station not Weak signal Station not available in Use the manual tune function found your area...
Page 6
Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type DAB-42 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.denver-electronics.com/denver-DAB-42/...
Need help?
Do you have a question about the DAB-42 and is the answer not in the manual?
Questions and answers