LG V30+ Quick Start Manual

QUICK START GUIDE

U.S. Cellular®
Customer Care:
MBM66316601 (1.0) 1-888-944-9400
Parts overview
Nano SIM/Memory card tray
Volume keys (+/-)
Power/Lock key, Fingerprint sensor
Wireless charging area
NFC area
Charger/USB cable port
Warning
Your device has an internal rechargeable battery. For your
•
safety, do not remove the embedded battery.

Installing the SIM card and

memory card

1 Turn the phone off, insert the ejection pin into
the hole on the card tray and pull until the card
tray pops out.
2 Place the Nano SIM card or memory card on
the card tray with the gold contacts facing
downwards. Make sure that card is positioned as
shown below.
Nano SIM card
Memory card
(optional-sold
separately)
NOTE
Always use a Nano SIM card supplied by your service provider.
•
For problem-free performance, it is recommended to use
•
the phone with the correct type of SIM card. Always use a
factory-made SIM card supplied by your service provider.
The memory card can be easily damaged by improper
•
operation. Please be careful when inserting, removing, or
handling it.
In order for the water-resistant and dust-resistant features to
•
work effectively, the card tray must be inserted correctly.
Warning
Some memory cards may not be fully compatible with the
•
device. If you use an incompatible card, it may damage the
device or the memory card, or corrupt the data stored in it.
Be careful with the ejection pin since it has a sharp edge.
•
If you insert the card tray into your device while the card tray
•
is wet, your device may be damaged. Always make sure the
card tray is dry.

Turning the power on

Press and hold the Power/Lock key for a few
seconds.
NOTE
When the device is turned on for the first time, initial
•
configuration takes place. The first booting time for the smart
phone may be longer than usual.

Turning the power off

Press and hold the Power/Lock key, then select
Power off.

Restarting the device

When the device is not working properly or does
not respond, simply press and hold the Volume
Down and Power/Lock keys until the device
restarts.
Printed in XXXXX