Download Print this page

Roper Double Oven Installation Instructions Manual page 5

Electric built-in 27” and 24” single and double ovens

Advertisement

Now start...
With oven in kitchen.
1
Re.nove stippmg materials,,
m tape and protectwe film from
wall oven. Do NoI remove the foam
shipping base at this time.
2
Remove racks and other parts
n
from mslde oven. Remove the
au grille taped to the top OI side
of oven
3
Complerely o*en lower oven
n
door Remove the two oven
door mews (Not all models have
oven door screws )
6
Personal Injury/Product Damage
' Use both hands to remove oven
doors.
' Grasp only the sides of rhe oven
door. Do Not use any portion 01
the lronr lrames or trim for
lifting.
Failure to properly grasp oven
door could result in damage fo
product or personal injury.
6
Turn power supply off Move
. oven close to final posmon
Remove and dmard foam shlppmg
base. Feed apphaace cable through
opemng m cabmet. Make electrical
conmxt~om See Electrical
remurements and Electrical
connection sectlom, Panel B.
Product Damage
Carefully push against seal area of
the front frame when pushing
oven into cabinet. Do Not push
against ourside
edges.
Failure to follow this instruction
can result in damage to the
porcelain finish.
._
4
Close lower oven door LO the
n
broil posltlon Grasp the sides
of the oven door and pull the door up
and out of hmge slots to remove Set
door aslde
5
Repeat Steps 3 and 4 for upper
. oven door
Floor Damaae
6.
Numbers
correspond
to steps.
PANEL D

Advertisement

loading