HotSpring ACE Quick Reference Manual

Boost
Soft Button
Use the Boost
function to
increase the
sanitizer output.
Use pre- or post-
event when spa
use is more than
normal. Takes
24 hours to
complete.
MODE Buttons
Use these buttons to scroll
through the menu options.
Water Care Icon
• Static icon indicates system
is functioning.
• Flashing icon reminds you to
check your spa water every
30 days and/or indicates that
the system requires attention.
©2011 Watkins Manufacturing 10/11

Control Panel

Quick Reference Guide

Boost
Water Care System
Functioning
To Access the ACE
System Menu
Press the Options
hard button.
To Access the ACE System Menu
▲
Press the MODE button until ACE+ is displayed on the screen.
▲
Then press the ON button to select the ACE menu.
▲
Press the MODE button until EXIT+ is displayed on the screen.
▲
Then press the ON button to select exit.
Boost Feature
Use the Boost function to increase the
sanitizer output. Use pre- or post- event when
spa use is more than normal. Takes 24 hours to
▲
complete. Press the MODE button until
bOOST is displayed. Press the OFF
twice to set and confirm the Boost.
Use Level
3
Set-up
Water Care Icon
• Static icon indicates system
is functioning.
• Flashing icon reminds you to
check your spa water every
30 days and/or indicates that
the system requires attention.
Salt Test Feature
Use this feature to test the salt level of the water. In
the ACE menu, press the MODE
is displayed. Press the OFF
confirm a Salt Test. The OK range values for Salt are
▼
button between 3 and 6. Refer to the ACE Owner's Manual if
your water is outside this range.
Use Level
Soft Button
Select the Use
Level, choose
from 1 (min) to
5 (max), to
indicate how
much sanitizer
is needed.
Set-up
Soft Button
Access the
Set-up menu
to set the Spa
Size at start-up, or
to run a Salt Test.
ON and OFF Buttons
▲
Use the ON button to enter the
ACE menu when ACE is displayed on
the screen, or to adjust an ACE setting.
▼
Use the OFF button to set and
confirm settings in the ACE menu.
▲
button until SALT
▼
button twice to set and
PN 62761 rev. C