Download Print this page

Sealey ML18/36.V3 Instructions For page 3

Rechargeable fluorescent floor light 2 x 20w

Advertisement

Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible with
the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste
authority for recycling information.
NOTE! The battery is a sealed lead-acid type. By law, it must be removed and recycled, or disposed of properly, according to
national and/or local regulations.
Place the light front side down.
Remove the screws from the rear panel and lift off from the unit enclosure.
Disconnect the wires from the two battery terminals, taking care to avoid accidental arcing of the terminals.
Lift the battery out of the casing.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection.
Battery Removal.
Dispose of batteries according to local authority guidelines.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
01284 703534
ML18/36.V3 Issue: 4 - 104/04/17
www.sealey.co.uk
sales@sealey.co.uk

Advertisement

loading