Table of Contents
Advertisement
5. Click Configure.
6. Select the Accessories tab.
7. In the TomTom OBDII-device section, select TomTom LINK 105 from the list.
8. Enter for TomTom LINK 105 the size (in cc) and the power (in kW) of the engine of your
vehicle.
Important: Make sure you have entered the correct engine size and power, as this infor-
mation is the basis for the calculation of the fuel consumption of your vehicle.
9. Enter the Bluetooth address indicated on the OBD-II connector of the LINK 105 you want to
install in that specific vehicle.
10. Click Save.
The Bluetooth address of your LINK 105 is now assigned to the LINK 5xx/4xx in the vehicle you
selected. Now you should
install your LINK 105 in your
vehicle.
8
Advertisement
Table of Contents
