Advertisement
Chapter 4
Connecting a Cisco Input Module
8
9
Status LEDs
Each input port includes a status LED that indicates the following information:
Table 4-1
Status
OFF
GREEN
BLINKING GREEN
BLINKING RED
RED
Installing the Cisco Input Module
Install a Cisco Input Module is provide additional input connections for a Cisco Reader Module or
Gateway
Before You Begin
Verify the following:
•
•
Installation Procedure
To install the module, perform the following procedure:
Mount the module to a wall. See
Step 1
information.
OL-20932-01
Type
PF
TM
Input Module LEDs
Description
Input is not configured
Input is configured and in normal state
Input is configured, and is receiving and alarm or other data.
Input is configured, short
Input is configured, open
Verify that the module has access to a power source. See
page 1-10
for more information.
Verify that you have the necessary mounting brackets or other hardware. See
or Optional Module, page
Description
Power fail input: an unsupervised input that raises a "power fail"
alarm when the circuit is open. Can be configured as an additional
unsupervised port. The corresponding LED is red when circuit is
open (when no input is connected).
Tamper input: an unsupervised input that raises a "tamper" alarm
when the circuit is open. Can be configured as an additional
unsupervised port. The corresponding LED is red when circuit is
open (when no input is connected).
1-12.
Mounting a Gateway or Optional Module, page 1-12
Cisco Physical Access Gateway User Guide
Installing the Cisco Input Module
Power Options and Requirements,
Mounting a Gateway
for more
4-5
Advertisement
