Table of Contents
Advertisement
Fitting Propeller Guards
Carefully remove the blanking plate by levering it out using a fingernail or blunt
screwdriver. Push the propeller guide into the slot, pressing down where
indicated on the centre diagram to prevent damage to the guard.
Propeller Installation
It is important for the correct
blade to be placed on the correct
motor or the aircraft will not fly
correctly. Each blade is marked
with an A or B on the underside to
indicate which motor it
corresponds to.
Insert the propeller over the motor
spindle and use a screwdriver to
tighten the screw, then push the silver
cap into position over the screw.
Removal is the reverse of the above,
first carefully removing the silver cap
with a blunt object.
7 of 17
Hide quick links:
Advertisement
Table of Contents
