Advertisement
3. Record your ring tone
1. Place a test call to your phone so that the
ORL 12 can record your phone's ring
tone.*
2. Press and hold the P1 button until the
light on the lifter begins to flash BLUE,
then immediately let go.
3. When the recording is successful, the
light on the lifter will flash
off.
*Ensure there is no background noise when
making your test call, and that your phone's
ringer is turned all the way up.
Optional: Adjust the lifter height
If the lifter doesn't seem to be lifting your handset high enough, or if it's
lifting it too high, these steps will get it set up just right.
1. Make sure the lifter is turned off (the
blue light should be off).
2. Press and hold both the P1 and P2
buttons on the lifter until the lifter light
alternates
and BLUE, then release
RED
both buttons. The lifter will lift to the
default height.
3. Press P1 to raise the height, and P2 to
lower the height.
4. Once you've got the height just right,
press the P1 and P2 buttons at the same
time to save the new lifter height.
Now you're ready to make a call!
Just press the button on your headset to lift the receiver and call someone. Why not
make that first call to us at Headsets.com. We'd be more than happy to hear from
you. Plus, one of our Headset Advisors can help you fine tune the settings on your
headset and lifter so you get the most value out of your purchase. 1-800-HEADSETS
(1-800-432-3738) M - F 6:00am - 4:30pm Pacific Time
Call us at
1-800-HEADSETS
(1-800-432-3738)
Monday-Friday 6:00am - 4:30pm Pacific Time
P
FREE Lifetime Product Support
We're experts and we're here to help you for
the life of your headset. Plus, your lifter comes
with a 2-year full replacement warranty.
CALL
1-800-HEADSETS (1-800-432-3738)
and turn
RED
ORL 12 QuickStart Guide
1
CLICK
www.headsets.com/support
Press P1 to
raise the height,
and P2 to lower
the height
Jenny Noyola
Customer
Service
Manager
Advertisement
