Talitor 3001077m Quick Manual

Version: 090724
Optional models:
Main I/O
board board
3001077m x
3001077ma x
3001077c
3001077ca
P/N: F40077004
Default Value
Video Resolution: 720x480
Recording Quality: Fair (1.2Mb)
Frame Rate: 25/30 frames per second
Motion Sensitivity: High
Motion Area: All area effective
Schedule Setting: All (Sunday to Saturday)
motion recording
Storage: Overwrite
Recording Length: 30 minutes a file
Date/Time Stamp Format: YYYY/MM/DD
Date/Time Stamp Position: Upper right
Date / Time Stamp Color: White
Language: English
External Trigger: Deactivate
Status Display: On
Start to record
Once power on unit, recording is factory preset
at motion activated. It can be reset as
continuous recording, having schedule, and
external trigger activation thru MENU. Manual
recording can always take place when
button is pressed. (Refer to "Remote Control" )
* Please press "menu" key before take away
the SD card, otherwise the recording will not be
saved onto SD/MicroSD card.
Playback Function
Press key on remote control to get i nto
playback menu. You can use "Quick search",
and enter the date/time which you would like to
view. Or get into "List all", and press
button to playback from a selected recording.
Basic Connection
Main board
Main board + optional I/O board
Audio
x
x
Power up the board
There are 2 kinds of power switch – mechanical
slide switch and electronic tact switch . Refer
to your supplier on which kind you would get.
Screen Icons
Recording method
Recording
Resolution
Frame rate
SD card method
: The red square will show up continuously
Off
when device is recording
: Standby but not at recording
: Schedule on motion detection activated
: External trigger activate recording
: Schedule continuous recording
: Manual recording by pressing "REC"
button on remote controller
per second
: Resolution: 1280 x 720
: Resolution: 720 x 480
: Resolution: 320 x 240
: Overwrite old files when SD card is full
: Stop recording when SD card is full
: Video system (NTSC/PAL)
Dip switch:
Off
1 NTSC system
2 Main board IR
3 Analog video in
4 Mechanical power switch
Time/Date stamp
Video
system
Key lock
...... / : Frame rate
* Please backup/format SD card regularly
in order to keep efficiency of SD card
On
PAL system
I/O board IR
Digital YUV in
Electronic power switch
* Please power off before connecting
or dis-connecting the I/O board
* The default value of LED indicators and buzzer are
ON, please turn it off via remote control if required.
* LED indicators and buzzer will be ON when powering
on, and then on or off according to user 's setting.
Remote Control Diagram
Playback
Power
Up
Left
Escape
Buzzer on/off
LED on/off
Name Function
Power
Power on/off the device
Playback Playback the recording files
Menu
Enter the menu setting
Move upward or increase
Up
While playback - Volume up
Left
Move left, fast backward
Confirm the setting/change
OK
Still image (snapshot)
Move right, fast forward
Right
Move downward or decrease
Down
While playback - Volume down
Escape current menu
Esc
Manual record
REC
Buzzer on/off
Bz
LED on/off
LED
Keylock Key lock/unlock
* Power key will not work when board is using
mechanical power switch
On
Menu
OK
Right
Down
Record
Key lock/
Un-lock