Advertisement
LED status
Red
On
X
LED
Power on
Green
On
Blinking
LED
System
System and SD
ready, SD
card normal,
card normal,
but doesn't
and has
have schedule
schedule
Yellow
On
Blinking
LED
Battery
Running out of
charging
battery, please
charge it
Recording Duration
NTSC @ 30 fps (unit: hour)
1GB
4GB
NTSC
1280x720 @ Better 0.59
2.38
720 x 480 @ Fair
2.00
7.99
320 x 240
4.13
16.52 33.04 66.08
PAL @ 25 fps
(unit: hour)
1GB
4GB
PAL
1280x720@ Better
0.71
2.86
720 x 480@ Fair
2.39
9.58
320 x 240
4.95
19.82 39.64 79.29
* The recording duration may vary from image
complication and frame rate setting
* Please safely remove SD/MicroSD card on computer.
* Please press Menu or Playback key, or power off the
board through electronic power switch before taking
away the SD/microSD card.
* 1280x720 is reserved for high resolution video input.
FAQ
Q1. What player software should I use to
playback the recording files?
Ans.
"Media
Player
Classic"
recommended, and can be downloaded
freely at
http://ftp.freenet.de/pub/filepilot/win
dows/multimedia/video/k-lite_codec_pack/klc
odec425f.exe.
If you use Windows Media
Player" you may need to install mpeg -4
decoder.
A lot more other mpeg -4 capable
player can playback the record files, such as
VLC, Storm Video Codec, ...etc.
Q2. How long can date/time last without the
power supply?
Ans. RTC battery can last for 3 months without
power supply (including battery supply)
Q3. Can both SD card slot and microSD ca rd
slot work at the same time? Which is
the higher priority?
Ans. SD card is first priority. If there is no SD
card, recorder board will record onto
microSD card. So far, two SD card slot s
cannot work simultaneously
Q4. Since there is a microSD card slot , why
there is optional I/O board?
Ans. SD card is larger sized and larger capacity
available. There is a flexible cable between
main board and I/O board, so the recorder
board can match mechanism design.
Q5. Why does the device not turn on
according to schedule?
Ans. The schedule will take place only when
device is turned on. If the device is on, it
will get into sleeping mode when out of
schedule and no operation for 30 seconds.
In sleeping mode, the device will auto -turn on
according to the schedule.
If the device is
off, it won't auto-turn on when schedule.
The most frequent use and important
functions
Off
File name explanation
Power off
T 2008 09 26 14 19 20
Off
Year
Date
System not
Month
ready or SD
To turn off date/time display on screen
card
System Setting > Date/Time > Stamp Format > Off
abnormal
To set schedule
Default of schedule is All motion activate.
Off
Battery not
charging
8GB
16GB
All means whole week from Sunday, Monday, to
4.77
9.54
Saturday. You can simply set "All" and it will
15.98 31.96
apply to whole week, or you can set certain
schedule of an individual day. Just press "OK"
on the day to settle the interval.
8GB
16GB
5.72
11.45
19.17 38.35
OK: To confirm the interval setting, and it will go
to next interval for the same date and same
recording method.
Specifications
Video system
Compression
is
most
Video resolution
Recording quality Best / Better / Fair
Recording frame
rate
Video size
Recording mode
Audio recording
External trigger
A/V connection
Power supply
Power output
Storage Media
Control
Date/time stamp
Power failure
Firmware
Current
consumption
(w/o camera & battery)
Operation temp.
Dimension
* If there is no schedule, external trigger is
deactivated, and using Electronic power
switch, the board will enter sleep mode
after 30 seconds without control.
.AVI
Minute
Hour
Second
* Erase the schedule before settling is recommended.
NTSC / PAL
MPEG-4
1280x720 / 720x480 / 320 x
240
1, 2, 3, 5, 13/15, 25/30 fps
Approx. 2 hours for 1GB
(@720x480, Fair quality)
Manual, Schedule
continuous, Schedule
motion, external trigger
Yes (Optional)
Alarm signal input (NC/NO)
Composite AV input / output
12V DC or reserved battery
connection
12V DC 200mA / 5V DC
300mA
SD / Micro SD card(1G to
16G, SDHC Class 6 is most
recommended)
IR remote control or keypad
(reserved circuitry)
Yes, position adjustable
Auto Recovery
Upgradeable, through SD
Card
Operation mode : 100mA
Standby mode : 90mA
Sleep mode : 10mA
+0~+50°C
60x60 mm (main board)
+50x36.5mm (I/O board)
NO: Will go to next schedule setting without
saving the current interval
Schedule setting order:
1. All > Motion
All > Continuous (end)
2. Sun > Motion
Sun > Continuous
> Motion
Mon > Continuous
Motion
... Until Sat > Continuous (end)
Finish: To escape schedule setting. Or you
can press "Esc" button on remote control, too.
To set interval up to 24:00
This recorder does not have 24:00 in the
schedule setting. For interval end with 24:00,
please set 23:59 instead.
To delete schedule
In motion/continuous recording, if the interval is
from 00:00 to 00:00, and select "OK", then the
interval will be canceled (erase).
Accessories
7-pin 12V DC input & output cable
# F10071502
12-pin Power switch + External trigger + IR
receiver + Keypad connection cable
# F12121500
4-pin Camera video-in and power out cable
# F13041500
2-pin Microphone
# F14021500
3-pin Audio/Video output cable
# F15031500
2-pin 5V power out cable
# F10021500
IR remote control
# F30207700
SD card and SD card reader (o ptional)
3.7V 4800mA Li-polymer battery (optional)
Charger cradle for Li-polymer battery (optional)
12V 1A power adapter (optional)
Mon
Tue >
Advertisement
