Page 1
Sales office and Warehouse: Euro Shatal ApS Euro Shatal Deutschland GmbH Murervej 5 Wernher von Braun Str.3 DK-6710 Esbjerg V , DENMARK D-86368 Gersthofen ,GERMANY Tel:(+45) 75168411 Tel:(+49) 8214609580 Fax: (+45)75168412 Fax:(+49)8214609581 E-mail:euroshatal@shatal.com E-mail:info@euroshatal.biz www.shatal.com www.euroshatal.de RP3014E-50 OPERATING INSTRUCTIONS & SPARE PARTS LIST...
Page 2
We hereby declare that the equipment described below conforms to the relevant fundamental safety and health requirements of the appropriate CE Directives, both in its basic design and construction. This declaration will cease to be valid if any modifications are made to the machine without our expressed approval. Product: Vibratory Plate Compactors : RP3014E-50 The said product has been sound tested per Directive 2000/14/EC...
Page 3
Antes de arrancar o motor certifique-se que não está ninguém na area perigosa próximo do motor ou equipamento, e que as guardas de protecção estão colocadas. • É aconselhável operar a máquina em boas condições de iluminação. • Protecção auricular deve ser usada. • Protecção aos pés deve ser usada. Oct, 2016 RP3014E-50...
Page 4
TECHNICAL SPECIFICATIONS MODELS RP3014E-50 Cat. No. WEIGHT Net Weight COMPACTION DATA Vibr. Frequency Centrifugal Force kg. 3000 Compaction Area m²/hour OPERATION DATA Max. Traveling speed m/min CAPACITIES Oil for gear box liters SAE 15W/40 DRIVE MOTOR Output Engine speed 2840...
Page 5
DIMENSION HANDLE IN THE WORKING POSITON HANDLE IN THE FOLDING POSITON MODEL Working Position Folding Position Working Position Folding Position RP3014E-50 1230 1150 1140 RP3014E-50 -4 - Oct, 2016...
Page 6
7. Attach a polyureathane plate under the compactor when compacting paving stones. STOPPING THE MOTOR - SEE PICTURES 11,12 ON PAGE 8 1. Press the stop button on the operation switch. (as shown in picture 11). 2. Disconnect the power cable (as shown in picture 12). RP3014E-50 Oct, 2016...
Page 7
Perform maintenance work on Motor according manufacturer’s instructions. • Check belt tightness and tighten if necessary. Belts should be move 10 –15 mm when pushed by the thumb. • Check and retighten bolts and nuts. RP3014E-50 -6 - Oct, 2016...
Page 8
SAFETY CHECK BEFORE PLUGGING IN THE MOTOR MOTOR WORKING DIRECTION TEST RP3014E-50 - 7 - Oct, 2016...
Page 9
OPERATING STOPPING THE MOTOR RP3014E-50 - 8 - Oct, 2016...
Page 10
Liability is reduced or nullified in the event that the user fails to comply with the operating and maintenance instructions and uses spare parts which are not guaranteed. Contents Vibratory plate---------------------------------------------------------------------------------------------- 10-12 Exciter--------------------------------------------------------------------------------------------------------- 13-14 Working handle--------------------------------------------------------------------------------------------- 15-17 Vulcalon Plate----------------------------------------------------------------------------------------------- 18 Schematic Diagram--------------------------------------------------------------------------------------- RP3014E-50 -9 - Oct, 2017...
Need help?
Do you have a question about the RP3014E-50 and is the answer not in the manual?
Questions and answers