Advertisement
READ THIS FIRST:
Check the pack and make sure you have all of the
parts listed on the front of this booklet. If not,
contact the outlet where you bought this product.
This product contains glass, care must be taken when
handling to prevent personal injury or damage to the
product.
This product must be installed / used by a competent
person in accordance with the current building and
IEE wiring regulations.
As the buyer, installer and/or user of this product it
is your own responsibility to ensure that this fitting
is fit for the purpose for which you have intended
it. cannot accept any liability for
loss, damage or premature failure resulting from
inappropriate use.
This product is designed and constructed according
to the principles of the appropriate British Standard
and is intended for normal domestic service.
This unit is suitable for both indoor and outdoor use.
If used in an outdoor environment the mains plug
must be housed in a suitable IP enclosure.
Do not use this portable floodlight in the immediate
surroundings of a bath, shower, or swimming pool.
Do not use the floodlight in any areas where
petrol, paint or other flammable liquids or
flammable fumes may be present.
If the portable floodlight is being used in an
outhouse etc, it should be protected by an ELCB /
30mA RCD.
This portable light should be positioned at least 0.5M
(500mm) away from highly flammable surfaces (e.g.
polystyrene, textiles).
This product comes pre-wired and comes fitted with
a 3 pin UK 13 amp plug & suitable fuse. The fitting is a
class 1 so should always be earthed.
Do not cover the fitting with any materials when in
use.
This product is not intended to be used by children
and persons with sensory, physical and/or mental
impairments that would prevent them from using it
safely.
Small children should be supervised to ensure that
they do not play with this portable light.
IMPORTANT: Always switch off at the socket before
removing the plug.
The plug is fitted with a suitable fuse. When
replacing, use only a suitable fuse approved to
BS1362 and carrying the relevant approval mark.
Never use the plug with the fuse bypassed or
omitted. If the external flexible cable of this
luminaire is damaged it shall be exclusively replaced
by a service agent or similar qualified engineer.
USAGE:
The product comes fully assembled and prewired
with 2M of cable and fitted with a 3 pin plug. The
head can be adjusted by loosening the bolts, re
tighten with the aid of a spanner once in the correct
position. Insert plug in mains socket and switch on
the light to illuminate.
Head can be adjusted by
loosening these bolts
Frame can be adjusted by
loosening this knob
WARNING:
Arrange the cord away from high traffic areas and
where it will not become a trip hazard.
• Do not use the floodlight in any areas where petrol,
paint or other flammable liquids or flammable
fumes may be present.
• Do not use this floodlight in the immediate
surroundings of a bath, shower, swimming pool or
where water is present.
LAMP REPLACEMENT:
This luminaire has a sealed LED lamp and is
maintenance free, no lamp replacement is required.
Advertisement
