LED-supplies flood-10w-stand Installation Instructions

LAMP SPECIFICATIONS:
700 lm
Nominal useful luminous flux
Rated Wattage 10W
Rated luminous flux 700 lm
Nominal life time of the lamp 30,000 hrs
Colour temperature 6200K
Number of switching cycles
before premature lamp ≥17,500
failure
Warm-up time up to 60 % of
Instant full light
the full light output
Dimmable No
Lamp dimensions (W/D/H) 115x100x85mm
Nominal beam angle 120°
Rated power 10W
Rated lamp lifetime 30,000
Lamp power factor >0.5
Lumen maintenance factor at
≥0.8
end of nominal life
Starting time <0.5
Colour rendering ≥0.75
Within 6 step
Colour consistency
Macadam ellipse
Rated peak intensity 327cd
Rated beam angle 120°
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
"WEEE Directive" effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer:
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
Producer Registration Number : WEE/DA4249YW
Issue 2013
0118 903 3299
MODELNO.
874/2012
CLEANING:
Clean this fitting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any
product, but may not be able to give specific
instructions regarding individual installations.
For breakage information visit:
0.5M
LED Floodlight with STAND - 10W
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Model: FLOOD-10W-STAND
10W Standard LED Floodlight With Stand
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Pack contents:
1 x Fitting