Viewing Vc-2'S Information (Information); Functions Of System Parameters; Settings Common To The Entire System (Common) - Roland VC-2 Owner's Manual

V-card software series vocal designer for v-synth xt
Hide thumbs Also See for VC-2:
Table of Contents

Advertisement

Viewing VC-2's Information
(Information)
1. Touch <▼MENU> in the upper right of the
screen.
A pulldown menu appears.
2. In the pulldown menu, touch <Info>.
The information screen appears.
This indicates the version of the VC-2.
3. Touch <EXIT> to close the window.
Functions of System
Parameters
This section explains what the different System parameters
do, and also how these parameters are organized.
Settings Common to the Entire
System (Common)
Master
Parameter
Value
Explanation
Master
415.3–
Adjusts the overall tuning of the VC-2.
Tune
466.2
The display shows the frequency of the
Hz
A4 note (center A).
Master Key
-24–
Shifts the overall pitch of the VC-2 in
Shift
+24
semitone steps.
Master
0–127
Adjusts the volume of the entire VC-2.
Level
Settings Common to All Modes (System Mode)
IO
Parameter
Value
Explanation
USB Input
The signal that is input from the computer via USB
Type
audio is used as the modulator (mic) or as the carrier
for Processor Type 1 or 2.
* The signal that is input via USB audio is mixed
with the signal from the V-Synth XT's MIC or
INPUT jack.
OFF:
USB audio input is not used.
PARA:
USB
L
R
The USB audio L (left) channel is used as the carrier.
The USB audio R (right) channel is used as the mod-
ulator (mic).
MIX:
USB
L
R
The USB audio L (left) and R (right) signals are
mixed, and used as the modulator (mic) and carrier.
MIX Car:
USB
L
R
The USB audio L (left) and R (right) signals are
mixed, and used as the carrier.
MIX Mod:
USB
L
R
The USB audio L (left) and R (right) signals are
mixed, and used as the modulator (mic).
Output
-12–
This adjusts the output gain from the VC-
Gain
+12
2's Analog Out and Digital Out. When, for
dB
example, there are relatively few voices
being sounded, boosting the output gain
can let you attain the most suitable output
level for recording and other purposes.
Digital
44.1,
Sets the sampling frequency of the digital
Output
48, 96
output.
Freq
kHz
V-Synth XT
Carrier (Processor Type 1, 2)
Modulator (MIC)
V-Synth XT
Carrier (Processor Type 1, 2)
Modulator (MIC)
V-Synth XT
Carrier (Processor Type 1, 2)
Modulator (MIC)
V-Synth XT
Carrier (Processor Type 1, 2)
Modulator (MIC)
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-card vc-1

Table of Contents