Trotec ec020 Quick Start Manual

Inserting the battery and SD card
Click
B - 1
Switching on
3 sec
Quick start guide - Thermal imaging camera EC020 / EC040
Adjusting the image
1. Point the camera at the area to be measured and press the
"A" button.
– The camera carries out a temperature comparison.
2. Focus the image.
3. Press the "A" button again.
– The camera carries out a temperature comparison.
4. Use the arrow buttons to adjust the image so that your image has high con-
trast.
• The buttons change the temperature range.
• The buttons move the average value of the temperature range.
To improve the display, you can
select various colour palettes.
1. Press the button.
2. Press the button twice.
3. Choose between the colour palettes with the
4. Press the "C" button to close the menu.
button.
EN