B&C Speakers Woofer 10PS26 Specification

10PS26
Woofer
700 W continuous program power capacity
76 mm (3 in) aluminium voice coil
Shorting copper cap for extended HF response
55 – 4000 Hz response
96 dB sensitivity
Specification
Nominal Diameter 250 (10) mm (in)
Nominal Impedance (1)
Minimum Impedence
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range 55 - 4000 Hz
Voice Coil Diameter 76 (3) mm (in)
Winding Material
Former Material
Winding Depth 18 (0.71) mm (in)
Magnetic Gap Depth 10 (0.4) mm (in)
Flux Density
Thiele & Small Parameters
Fs
Re
Qes
Qms
Qts
Vas 38 (1.3) dm3 (ft3)
Sd 320 (49.1) cm2 (in2)
Eta Zero
Xmax
Xvar
Mms
Bl
Le
Mounting and Shipping Info
Overall Diameter 262 mm (10.3 in)
Bolt Circle Diameter 245 mm (9.6 in)
Baffle Cutout Diameter 230 mm (8.8 in)
Depth 123 mm (4.8 in)
Flange and Gasket Thickness 14 mm (0.55 in)
Net Weight 6 kg (13.2 lb)
Shipping Weight 6.7 kg (14.7 lb)
Shipping Box 320x320x160 mm
(12x12x6.3 in)
1 For different impedances, please ask.
2 2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms
Nominal Impedance
8 Ohm
7.1 Ohm
350 W
700 W
96 dB
Aluminium
Glass Fibre
0.9 T
54 Hz
5.8 Ohm
0.33
2.9
0.29
1.8 %
+/- 5.5 mm
+/- 5 mm
33 g
14.1 Txm
1.2 mH