Advertisement
TP800/3 BP/4 BP Series Programming Highlights
Filtration
The system is factory-programmed with one filter cycle (Be sure to set the time-of-day properly). The filter time and duration are
programmable. Refer to the 3 BP/4 BP User Guide for detailed instructions.
A second filter cycle can be enabled as needed.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High
Range can be set between 80°F and 104°F. The Low Range can be set between 50°F and 99°F. Low
Range may be economical during non-use periods. See "Settings" on the Main Screen.
Restricted temperature ranges may determined by the manufacturer.
Ready and Rest Modes
If the filtration pump is a 2-Speed Pump 1, Ready Mode will circulate water every 1/2 hour, using
Pump 1 Low, in order to maintain a constant water temperature, heat as needed, and refresh the tem-
perature display. This is known as "polling."
Rest Mode will only allow heating during programmed filter cycles. Since polling does not occur, the temperature display may not show a current
temperature until the filtration pump has been running for a minute or two. Ready in Rest Mode may appear when Jets 1 is activated.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42274_A 12/23/14
To access the entire handbook please visit our website at www.catalinaswimspas.com
or www.catalinaspas.com and click on the support tab for end users.
102°F
High Range
Set:
104°F
8:32 PM
Shortcuts
Ozone
Filter 1
Ready in Rest Mode
Heating
www.balboawater.com
Spa
Settings
Advertisement
