Before Using The Kr-11; Connections; Setting Up The Music Stand; Opening And Closing The Keyboard Lid - Roland KR-11 Owner's Manual

3. Before using the KR-11

3.1 Connections

Connecting the Pedal Cable
Insert the pedal cable into the
Pedal connector on the panel of
the KR-11.
Connecting the power cord
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any con-
nections.
1. Connect the supplied power cable to the AC Inlet
on the KR-11's panel.
2. Connect the power cable to an AC outlet.
Be sure to use the supplied power cord.

3.2 Setting up the music stand

Set up the music stand as shown in the figure below.
Fold the three supporting feet at the back of the stand
and check whether the stand is held in place.
Before moving the KR-11, be sure to lower the music
stand as a safety precaution.
3.3 Opening and closing the
keyboard lid
1. When opening the KR-11's lid, grasp it with both
hands and gently lift it upwards, then slide it towards
the back of the piano.
2. When closing the lid, slowly pull it forward, then
gently lower it into place.
Never insert your hands between the lid and the key-
board.
KR-11 – Setting up the music stand
9