Advertisement
Quick Links
Wireless Controller for Wave Maker
User's Manual
Matched Models, RW4/8/15/20 and WP10/25/40/60
Company：Jebao(Zhongshan)Electrical Appliance Co.Ltd
Address：Tongmao Industrial Park, Dongsheng Town, Zhongshan city.
Guangdong Pro. China
Tel.: +86-760-28136717/20/21
E-Mail:
info@jebao.com
Fax: +86-760-28136725
Website: www.jebao.com
Jebao wave makers are intended to simulate the natural waves and
whirlpools found in a marine environment.
Before installing and using the controller, please read through these
instructions to familiarise yourself with the correct operation of the device.
Features:
1. Unique wireless multi- mode controller to allow adjustment of the
wave maker to suit the users requirements.
2. Use of low-voltage, low power, DC variable-speed pump for safe
operation.
3. Easy adjustment & operation.
4. Wireless communication with other Wireless Controllers
Installation Instructions:
1. Accessories: Intelligent controller, power adaptor, mains cable, double
sided tape, instruction manual.
2. Assembly: Remove one side of the double-sided tape and stick to the
rear of the controller. Remove the other side of the double-sided tape and
affix the controller in a suitable location.
3. Attach the 3-pin waterproof connector from the pump to the controller.
Then attach the DC plug to the controller. And attach the AC cable of the
adaptor.
Advertisement
Related Manuals for Jebao RW4
Summary of Contents for Jebao RW4
- Page 1 Jebao wave makers are intended to simulate the natural waves and whirlpools found in a marine environment. Before installing and using the controller, please read through these instructions to familiarise yourself with the correct operation of the device. Wireless Controller for Wave Maker Features: User’s Manual...
- Page 2 Fig 1: assembly and operation Fig. 1 Functions: MODE/NIGHT: Press the “MODE” button to cycle through the different modes. Long press to enter into Night mode. SPEED/FEED: Press the button to adjust the pump flow rate. Long press to enter/exit the 10 minute feed mode. Wi-Le/ LOCK: Press the button to set controller to Master /Slave or independent mode (slaves are syncronised with “master controller”).
- Page 3 W1：Wave Mode indicator goes out. Adjusting the dial will alter the pump on/off period. This will create a wave in the tank which can be adjusted to suit your needs. Increase Dial Locking Function: Enter lock mode by a long press of the the wave length by turning the dial clockwise, and reduce by turning Wi-Le/LOCK button until the red LOCK indicator lights.