Error Message List - Roland SP-555 Owner's Manual

Appendix
Parameter Range (display indication)
D Beam As- Off, 1–30
sign ("oFF", " 1"–" 30")
Seq Ach Ctrl Off, Bank A–J
Pad Bank ("off", "b. A"–"b. J")
Seq Bch Ctrl Off, Bank A–J
Pad Bank ("off", "b. A"–"b. J")
Seq Cch Ctrl Off, Bank A–J
Pad Bank ("off", "b. A"–"b. J")
Blinking Off, 1–9, Pattern
speed of the ("off", " 1"–" 9", "Ptn")
display illumi-
nation
Sample Ex- WAV, AIFF
port Type ("WAV", "AIF")
Pedal Assign Loop Capture Play/Overdub,
Loop Capture Play/Stop, Seq
Start/Stop, Fixed Velocity, Effect
On/Off
("LC.1", "LC.2", "SEq", "VEL",
"EF.S")

Error message list

Message
EJC(Eject)
EMP(Empty)
Err(Error)
FUL(Memory Full)
Prt(Protected)
UnS(Unsupported format)
64
Panel operation
[CANCEL] + [V-LINK]
➜
[SYNTH]/[FILTER]/[TRIGGER]
➜
CTRL 3 knob
[CANCEL] + [V-LINK]
➜ ➜
Bank [D/H]
[CANCEL] + [V-LINK]
➜ ➜
Bank [E/I] CTRL 3 knob
[CANCEL] + [V-LINK]
➜ ➜
Bank [F/J] CTRL 3 knob
[TAP TEMPO] + Power On
➜
CTRL 3 knob
[RESAMPLING] + Power On
➜
CTRL 3 knob
[CANCEL] + press the pedal
➜
CTRL 3 knob
Explanation
Processing is not possible because the memory card was removed.* Don't remove the card while the pow-
er is on.
There is no sample, pattern, or backup data to delete.
There is no backup data to load.
There is no WAV or AIFF to import.
There is no data to export as WAV or AIFF.
Invalid data was found in internal memory, and it was repaired or deleted.
Processing could not be performed because of insufficient memory.
Processing could not be performed because Protect is enabled.
Processing was halted because the WAV or AIFF was in a format not supported by the SP-555.
Remarks
After making the setting, press [SAMPLING] to save it.
After making the setting, press [SAMPLING] to save it.
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
After making the setting, press [SAMPLING] to save it.
After making the setting, press [SAMPLING] to save it.
Select the format for sample export. After making the
setting, press [SAMPLING] to save it.
After making the setting, press [SAMPLING] to save it.
For details on each setting, refer to "About the pedal"
(p. 68).