iNels RF Pilot User Manual

Wireless remote controller with display

Advertisement

Quick Links

RF Pilot
Wireless remote controller with display
EN
Before You Start...
The User's Manual provides information for the installation and use of the device. The Manual is always included in the package. The
device may only be installed and connected by persons with requisite professional qualifications who have become thoroughly
familiarized with this Manual and the functions of the device. Trouble-free operation also depends on the previous method
of transportation, storage and handling. Should you become aware of any signs of damage, deformation, malfunction or of any
missing parts, do not install this product and return it to the vendor. After the expiry of its service life, the product and all its parts
must be disposed of as electronic waste. With consideration to the transmission of the RF signal, ensure that RF components are
suitably located in the building where the device is to be installed. The RF Control system must only be installed in indoor areas. The
device has not been designed for outdoor use or use in moist environment, it must not be installed in metal distribution boxes and
plastic distribution boxes with metal doors as this would prevent the transmission of the radio frequency signal. RF Control is not
recommended for the control of devices providing for vital life functions or for the control of risk devices such as lifts, pulleys etc. -
radio frequency transmission could be hampered with an obstacle, interfered with, the transmitter battery may become depleted etc.
thus disabling the remote control. Not suitable for use in industrial environment.
Characteristic
• The RF Pilot remote control is a central controller for switching electrical appliances and equipment, dimming lights, con-
trolling blinds, etc.
• When pressing the button, it sends a set signal (ON / OFF, dimming, time switching OFF / ON, blinds up / down).
• Option of setting light scenes, where with a single press, you can control up to 10 units at once.
• The Favorites mode lets you preset the most frequently used devices on the home screen.
• Option of grouping dimmers (RFDA-73M/RGB), where you can place up to 10 units under a single control panel = control
of over 100 m of colored LED strip.
• Designed in white and anthracite with color OLED display.
• Display of room temperature, battery status, date and time directly on display.
• Bidirectional communication, transmits and receives commands and displays the status of units.
• Thanks to the function of measuring the signal between the controller and unit, you can use it for testing the range and
signal quality.
• It is possible to combine up to 40 units of iNELS RF Control (you can gradually expand the installation from 1 unit).
• Battery power (1.5 V 2x AAA - included in supply) with battery life of around 3 years based on frequency of use and type
of batteries.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater
RFRP-20.
• Communication frequency with bidirectional protocol iNELS RF Control.
Overview of wireless RF Control devices
Controllers
RFWB-20/G, RFWB-40/G
- Wireless wall controller - 2 button / 4 button
RF Key
- 4 button controller, keychain
RF Pilot
- Wireless remote controller with display
RFSG-1M
- Wireless contact converter - 2 inputs
RFIM-20B, RFIM-40B
- Wireless contact converter (2 inputs / 4 inputs)
System units
RF Touch-B, RF Touch-W
- Wireless touch unit - fl ush / surface mounted
eLAN-RF-003
- Smart RF box
eLAN-RF-Wi-003
- Smart RF box with Wi-Fi
RFRP-20
- Repeater to extend the range
RFGSM-220M
- Energy gateway
Switches
RFSA-11B
- Wireless switch unit (single-function) - 1 output
RFSA-61B
- Wireless switch unit (multi-function) - 1 output
RFSA-62B
- Wireless switch unit (fl ush mounted) - 2 outputs
RFSAI-61B
- Wireless switch unit with the input (for a pushbutton)
RFSA-61M
- Wireless switch unit - 1 output
RFSA-66M
- Wireless switch unit - 6 outputs
RFSC-61
- Switching socket (multi-function)
RFUS-61
- Switch unit for outdoor use (multi-function)
RFJA-12B, RFJA-32B
- Switch unit for shutters
Dimmers
RFDA-73M/RGB
- Dimming actuator
RFDEL-71B
- Universal dimmer (fl ush mounted)
RFDEL-71M
- Universal dimmer (DIN rail mounted)
RFDW-71
- Wireless Dimmer Switch
RFDSC-71
- Dimming socket (multi-function)
RFDAC-71B
- Analog controller 0(1)-10V
Lighting
RFSOU-1
RF-RGB-LED-550
RF-White-LED-675
Temperature control
RFATV-1
RFSTI-11B
RFSTI-11/G
RFTI-10B
RFTC-10/G
RFTC-50/G, RFTC-100/G
Energy management
RFPM-2M
RFTM-1
Monitoring units
RFSF-1B
RFSD-100, RFSD-101
RFMD-100
RFWD-100
Accessories
FP-1
TC, TZ, Pt100
AN-I
AN-E
Telva
CT50
LS, MS, WS, IRS
Perenmarkt 10B, 1681PG ZWAAGDIJK-OOST ind.terrein: WFO/ABC THE NETHERLANDS
Tel: +31(0)228-567729, Fax: +31(0)228-567797, Email: info @ wardenaar.com, Internet: www.wardenaar.com
Rabobank 32 69 98 268, KvK te Alkmaar 37079598, BTW NL 8070.48.768.B01
Technical parameters
Display
Type:
Resolution:
Side ratio:
Visible surface:
Backlighting:
Diagonal:
Control:
Power supply
Power supply:
Battery life:
Control
Range in free space:
Frequency:
Other data
Operating temperature:
Storage temperature:
Color design:
Protection:
Operating position:
Dimensions:
Weight:
Related standards:
* batteries are included in the package
- Wireless twilight switch
- Wireless coloured bulb
- Wireless white bulb
- Wireless thermo-valve
- Switch unit with a temperature sensor (fl ush mounted)
- Switch unit with a temperature sensor
- Wireless temperature sensor
- Simple wireless temperature controller
- Wireless temperature controllers
- Energy gateway
- Wireless pulse converter
- Wireless fl ood detector
- Smoke detector wireless
- Motion detector wireless
- Window / Door detector wireless
- Flood probe
- Temperature sensors
- Internal antenna
- External antenna
- Thermodrive
- Current transformer
- LED sensor, Magnetic sensor, Infra Red sensor
color OLED
128 x 128 pixels
1:1
26 x 26 mm
self-illuminating text
1.5"
direction button, control buttons
2 x 1.5 V AAA batteries / R03*
approx. 3 years, according to the
frequency of use and battery type
up to 200 m
866 MHz, 868 MHz, 916 MHz, 922 MHz
0 to +55 °C
-20 to +70 °C
white
anthracite
IP20
any
130 x 41 x 18 mm
61 g
EN 60730-1
02VJ-004 rev.2
1/8

Advertisement

Table of Contents
loading

Summary of Contents for iNels RF Pilot

  • Page 1 IP20 signal quality. • It is possible to combine up to 40 units of iNELS RF Control (you can gradually expand the installation from 1 unit). Operating position: • Battery power (1.5 V 2x AAA - included in supply) with battery life of around 3 years based on frequency of use and type...
  • Page 2: Battery Insertion

    The memory has an independent power supply. Any custom adjustment (except for time and date) will remain. After inserting the batteries, the RF Pilot name and the fi rmware number will appear on the initial screen. Basic Steps for Successful Programming of RF Pilot...
  • Page 3 Fig. 5 using the T1 button (Fig. 5). The list of functions supported by the se- lected actuator will be displayed. Remove - used to delete the actuator from the memory of RF Pilot (Fig. 1). mo 01.01.10 12:54 Memory: Memory: Using the direction button select the actuator to be removed.
  • Page 4 RF Pilot Wireless remote controller with display Settings - Rooms Menu Rooms is used to name the rooms, the name will be displayed in the main menu list. Move in the Settings Menu using Language mo 01.01.10 12:54 mo 01.01.10 12:54 the direction button to select Rooms.
  • Page 5 SELECT Fig. 1 Fig. 2 Fig. 3 Fig. 4 Initial Screen - Quick Control Activate RF Pilot from sleep by pressing any button. Press any button briefly to display the Initial mo 01.01.10 12:54 mo 01.01.10 12:54 mo 01.01.10 12:54 mo 01.01.10...
  • Page 6: Quick Control

    RF Pilot Wireless remote controller with display Quick Control Controlling the assigned actuator (without function) Controlling the assigned button with function Actuator Pressing the directional button left Pressing the directional button right Actuator Pressing the directional button left Pressing the directional button right RFSA-11B Switch Off...
  • Page 7 There is a memory function of last used value of brightness (last used brightness setting) = i.e. if you set the brightness to 30 % and then the Wait approx. 1s between individual button presses. device is turned off by other wireless transmitter, so the value 30% will be kept and saved in RF Pilot. The setting serves to define time for each actuator. (Fig. 1).
  • Page 8: Universal Information

    RF Pilot Wireless remote controller with display Universal information The displayed temperature is for information only and may be affected by the placement of the controller near heat sources, windows, prolonged holding in hand, etc. Rename Actuators (Rooms, Scenes) - the min. length of the name is 1 character, the max. length is 12 characters. Upon deleting the whole name (by the T2 button) and confirming (by the T1 button), the factory setting is restored (Actuator x, Room x, Scene x).

Table of Contents