Mounting - Leuze electronic MSI-SR4B Manual

6

Mounting

WARNING
Improper mounting may result in serious injury!
The protective function of the safety relay is only ensured if appropriately and professionally mounted for
the respective, intended area of application.
 Only allow competent persons to install the safety relay.
 Observe the relevant standards, regulations and these instructions.
The safety relay is intended for mounting on a DIN rail in a cabinet.
Prerequisites for mounting:
• Cabinet with appropriate protection rating (at least IP54).
• Sufficient space on the DIN rail.
• Arrangement of the protective device acc. to EN 999 and IEC/pr EN 61496-2.
 Snap the safety relay onto the DIN rail.
The safety relay can be connected to the safety sensors.
Leuze electronic
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
MSI-SR4B
Mounting
12