Advertisement
Quick Links
DE610
HF Drivers
160 W continuous program power capacity
65 mm (2.5 in) aluminium voice coil
1000 – 18000 Hz response
Shorting copper cap for extended HF response
1.4" horn throat diameter
Titanium diaphragm
108 dB sensitivity
Specifications
Throat Diameter (1)
36 mm (1.4 in)
Nominal Impedance (2)
Minimum Impedance
Nominal Power Handling (3)
Continuous Power Handling (4)
Sensitivity (1W/1m) (5)
Frequency Range
Recommended Crossover (6)
Voice Coil Diameter
65 mm (2.5 in)
Winding Material
Inductance
Diaphragm Material
Flux Density
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
156 mm (6.1 in)
Depth
65 mm (2.5 in)
Net Weight (1 unit)
3.8 kg (8.4 lb)
Shipping Weight (2 units)
8.3 kg (18.3 lb)
Shipping Box (2 units)
210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME90 horn
2 Also available in 16 ohms, data upon request
3 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6 12 dB/oct. or higher slope high-pass filter.
8 ohm
7.6 ohm
80 W
160 W
108 dB
1 -18 kHz
1.2 kHz
Aluminium
0.15 mH
Titanium
1.75 T
Advertisement
