B&C Speakers HF Drivers DE500 Specifications

DE500
HF Drivers
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coil
1000 – 18000 Hz response
Optimized Neodymium magnet assembly with shorting copper cap
1" horn throat diameter
Titanium diaphragm
107 dB sensitivity

Specifications

Throat Diameter (1)
Nominal Impedance (2)
Minimum Impedance
Nominal Power Handling (3)
Continuous Power Handling (4)
Sensitivity (1W/1m) (5)
Frequency Range
Recommended Crossover (6)
Voice Coil Diameter 44 mm (1.7 in)
Winding Material
Inductance
Diaphragm Material
Flux Density
Mounting and Shipping Info
Two M6 holes 180° on 76 mm (3
in) diameter
Three M6 holes 120° on 57 mm
(2.2 in) diameter
Overall Diameter 102 mm (4 in)
Depth
Net Weight (1 unit) 1.4 kg (3.1 lb)
Shipping Weight (8 units) 12.2 kg (28.6 lb)
Shipping Box (8 units) 230x230x160 mm
1 Driver mounted on B&C ME45 horn
2 Also available in 16 ohms, data upon request
3 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6 12 dB/oct. or higher slope high-pass filter.
25 mm (1 in)
8 ohm
7.6 ohm
50 W
100 W
107 dB
1 -18 kHz
1.5 kHz
Aluminium
0.11 mH
Titanium
1.9 T
51 mm (2 in)
(9x9x6.3 in)