Samsung SHS-3321 Quick Manual page 2

LEFT-HANDED DOOR
4- Connecting the Magnetic Sensor
5- Connecting the Cable
6- Thumb Turn, Screws, Magnet for magnetic sensor
Stick at the
door frame
Magnet
7- FINAL CHECK
1. Install 4 batteries. A Melody will sound when all 4 batteries are installed correctly.
2. Close the door to detect the magnetic sensor. You can hear the beep sound when the magnetic sensor
detects. After that, press [OPEN/CLOSE] button to check whether the dead bolt works properly.
3. Stick the magnetic sensor with attention on the distance.
CAUTION : The gap between the door side and the door-frame magnetic sensors should be close enough
to be detected.
For support, please call this number
For tutorial videos & manuals please go to our website: www.digitaldoorlocks.com.au
CAUTION : PLEASE CHECK
1. THUMB TURN DIRECTION
2. THE DEAD BOLT ACTION BY
THE THUMB TURN IS SMOOTH
If the dead bolt action is not smooth,
Please check Bolt Hole and Tail Piece.
Max 20mm
1-800-665-397
RIGHT-HANDED DOOR
CAUTION
PLEASE
MAKE SURE
YOU WILL
PUT IN THE
CORRECT
SIDE
Max 20mm
Stick at the
door frame
Magnet