Performance - ActSafe TCX Assault User Manual

Power ascender
Table of Contents

Advertisement

E.02 PERFORMANCE
Ascender Performance
The lifting distance of the Ascenders,
and also speed in the case of the
TCX Seal, are dependent on the
lifted load and temperature of the
environment. The optimal operating
temperature range is between 5°C
(41°F) and 35°C (95°F). The maximum
temperature range is from -10°C
(14°F) to 40°C (104°F); the Battery
performance will be greatly affected
in these extreme conditions. See
chart opposite for detailed information.
Battery Capacity
Low temperatures:
The capacity of the Battery is
affected at temperatures below 5°C
(41°F) which will result in an initial loss
of lifting performance (speed) and
will affect the lifting distance. The
Battery will behave as if it wasn't fully
charged but will warm itself during
the first minutes of operation. Lifting
performance is regained but there will
be a loss in distance depending on
the temperature of the environment.
High temperatures:
Battery performance will be affected
by temperatures over 40°C (104°F)
which will result in high internal Battery
temperatures and therefore in a
reduced lifting distance. In case of
the Battery overheating the BMS may
shut the Battery off until the Battery
has cooled to operating temperature.
RECOMMENDATION
i
In cold environments, maintain
optimal Battery temperature
and perfomance by keeping the
Battery in the transportation box
as long as possible.
Note
Initial lift speed capacity will be
limited with a cold Battery. It is
only possible to ascend at lower
speeds until the Battery warms
up and normal performance
can be expected.
There is a difference in
performance between old and
new batteries, all figures are
based on new batteries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tcx force

Table of Contents