Advertisement
STEP
Create A Distorted Guitar
5
Sound
The GAIA SH-01 contains a powerful e ects section that lets you use ve e ects simultaneously.
Let's try creating the sound of a distorted guitar.
1.
Call up the "PRESET A-6" patch.
Press the
[PRESET
PATCH]
button
2.
Press the [KEY HOLD] button to turn o its
illumination.
3.
First, let's listen to the undistorted sound.
Press the EFFECTS [DIST] button so its light is o , and play the
keyboard.
You'll hear the undistorted sound.
4.
Press the EFFECTS [DIST] button so it's lit, and
play the keyboard again.
Play two- ngered chords to simulate the performance of a rock
guitarist.
If you hold a note for a while, you'll hear the feedback that's
typical of a guitar amp played at high volume.
A NOTE OF
ADVICE
ADVICE
ADVICE
Press the
[BANK]
button and
then press the
[1] (A)
button
GAIA's Amazing E ects!
The GAIA SH-01 contains ve e ects processors: distortion (DIST), modula-
tion (FLANGER), delay (DELAY), reverb (REVERB), and low boost (LOW
BOOST). Using the DIST or FUZZ e ects located in the leftmost column will
distort the sound, making it more aggressive. DELAY and REVERB let you
create lush, spacious sounds. Go ahead and try out various e ects to hear
what they do.
Press the
[6]
button
Press the [DIST] button
so its light goes out
11
Advertisement
