Sharp SE-02 User Manual page 9

3.2 Remove your SIM card, MicroSD memory card and battery
Pull off the battery cover.
Pick up the battery using the protruding edge and
remove the battery from the phone.
NOTE:
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery is used.
*When changing the MicroSD memory card, first
make sure that the phone has been turned off
and then change out the card. If the MicroSD
memory card is changed while the phone is still
turned on, the data stored on the card may be
destroyed or become unreadable.
Slide the SIM card out.
SIM Card
Slide the MicroSD memory card out of the MicroSD
memory card slot.
9 of 33