Various Other Settings
Setting the Type of CD To Be Played
Back (CD/Audio Type)
The ATELIER may be unable to correctly recognize the type of
CD being used. In such instances, you can specify the type of
CD manually.
1.
Press the [Utility] button.
2.
Press the Menu [
of times to select "CD/Audio Type."
ig.09-09
3.
Press the Value [-] [+] buttons to change the
setting.
Setting
Auto
The CD type is detected automatically.
General CDs for Player Piano contain audio
Type A
and MIDI data, and the data format may vary
from one CD to the next. If the CD's data
format does not match the ATELIER's settings,
Type B
a "beep" will sound.
Commercial Audio CD (CDs other than those
STEREO
designed for use with the piano player piano)
To return to the basic screen, press the [Utility] button.
Note that certain commercially available CDs cannot be
NOTE
played back on the
108
] [
] buttons a number
Description
ATELIER
.
Adjusting the Timing of a Player Piano
CD's Piano Sound and Accompaniment
(CD/Audio Sync)
With some player piano CDs, the piano and accompaniment
sounds may not be synchronized properly. In such instances,
you can adjust the timing of the piano sounds so that they are
in time with the accompaniment.
1.
Press the [Utility] button.
2.
Press the Menu [
of times to select "CD/Audio Sync."
ig.09-09
3.
Press the Value [-] [+] buttons to change the
setting.
1–100
To return to the basic screen, press the [Utility] button.
] [
] buttons a number
Setting