Display Section - Technics RS-TR979 Service Manual

@ Tape counter buttons
(COUNTER 1/COUNTER
MODE:
.--...
RESET:
@ Automatlc-record-muting button
(0 AUTO REC MUTE)
This button is used to make a silent interval on the tape while
recording is in progress.
@ Record button (8 REC)
This button
@ Reverse-side
This button
"B" of the cassette.
(The tape will move in the right-te-Ieft direction.)
I
r'

Display section

@ High-speed rewind/fast-forwardsearch
indicator (
Illuminates during high-speed rewindlfast-forward
r
speed search.
@ Tape counter/ATC
Normally functions as the tapellinear
ATC (auto tape calibration),
operation.
@ ATC memory indicator (
Flashes during ATC(auto tape calibration), and
luminated when the ATC operation is completed.
@ ATC graphic display
Shows a graphic display of the ATC(auto tape calibration)
operation.
@ Tape.to-tape recording-speed Indicators
(x1,~)
One of these indicators illuminates to show which of the tape-
to-tape recording speeds was selected
to-tape recording-speed
@
Recording indicator ( mm )
r--
Illuminates to indicate that this unit is in the recording stand-by
mode or is recording.
2)
This button is used to select the tape/linear
counter indication.
This button is used to reset tlie tape counter in-
dication to "000_"/"00.00".
is used to set deck to the recording
playback button (~
is used to start the playback or recording of side
~
/fl. In [lJ I-I II
c
III IlJ.I~ {Ji
-30 -25 -20 -15 -12 -10 -8
L11111111111:1111111111111111111111111111111111111111111111,"
R .11111111111111111111111111111'111111111111111111111111111.11
ffiJ
)
display
counter display. During
displays the status
m )
by pressing the tape-
button.
@ Stop button (8)
This button
@ Forward.side playback button ~)
Thisbutton
"A" of the cassette.
(The tape will move in the left-to-right direction.)
@ Open/close button ( ~ OPEN/CLOSE)
This
@ Rewind/fast-forward search buttons
(~~~
These buttons
stand-by mode.
easily and quickly search for the program's beginning of the
tape.
@ Pause
This button is used to temporarily stop the tape playback or
recording.
2~ ,(
,(
E- : ::::;::::;:=::-3
E-. 400. 3k .10k .-3
-6 -4 -2m 0 +2 +4 +6 +
Remote-control indicator (R.C.)
@
Illuminates to indicate that this unit can now be controlled by
the remote control transmitter of the appropriate
or high-
nected.
@> Reverse-side
Illuminates during playback or recording to indicate that side
"B" of the tape is being used.
of the ATC
@ Dolby noise-reduction indicators ( II , m )
Each indicator illuminates to show the type of Dolby noise-
reduction system selected by pressing the Dolby noise-reduc-
then remains il-
tion button.
(@ Forward-side
Illuminates during playback or recording to indicate that side
"A" of the tape is being used.
@ Playback indicator (PLAY)
When this indicator illuminates steadily, it indicates that this
unit is in the playback or recording mode.
When flashing, indicates that this unit is in the pause mode or
in the recording stand-by mode.
@ Input level meter
During playback, this meter indicates the level of the recorded
sound.
During recording,
justed by the recording-level control.
@ Reverse-mode
Each indicator illuminatesto show which of the reverse
was selected by the reverse-mode selector.
-5-
is used to stop the tape movement.
is used to start the playback or recording of side
button is used to open or close the cassette holder.
TPS)
are used to advance or rewind the tape, or to
button (II)
In (11 I-I I-I
III IlJ .CJ U1
«1)
indicator
indicator (I»
it indicates the level being recorded,
indicators
(~
l
RS.TR~
receiver con-
ad-
,C"':>, ~~~)
modes