CEL-FI G32-2M Quick Start Manual

Basic Functionality
The Cel-Fi GO M connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The Cel-Fi GO M Smart
Signal Booster finds the appropriate cellular signal, per the product's
configuration, improves the signal, and amplifies it. Improved
service is provided to the user via the Server Antenna.
Note: A Stationary version ("GO X") of the product is available. Go to
cel-fi.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app's dashboard shows the system "Boost" value. A numeric
representation mapped to the amount of Signal Gain the system
is providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO M
Your Cel-Fi GO M will automatically select the strongest cellular
signal to boost. However, you may manually configure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO M with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors
and outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
Cel-Fi GO M Smart Signal Booster

User Interface

Cel-Fi GO M features an LED on the top face to indicate the
unit's state:
LED MEANING
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.
Note: In mobile usage, it is normal for the Cel-Fi GO M to fluctuate between
scanning and boosting. The Cel-Fi GO M automatically adjusts its boost
behavior based on available signal.

Troubleshooting

ISSUE MEANING
Continual Blinking Unit is operational, • Make sure both antennas are connected
properly and are appropriate for the
GREEN but not attaching to a
desired frequencies to boost.
network to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED Unit is not • Unplug and reinsert power.
• If restart has no effect, contact vendor for
operational.
remedy.
Antenna Kitting
The following antennas are authorized to be used with Cel-Fi GO M
Smart Signal Booster:
MODEL DESCRIPTION
Mobile Mag Mount
CERTIFICATION
FCC, Australia
DONOR
A41-V21-100
3
MODEL DESCRIPTION
Mobile Mag Mount
CERTIFICATION
CE
DONOR
A41-V21-101
3
MODEL DESCRIPTION
Patch Antenna
CERTIFICATION
FCC, CE
DONOR
A41-V30-100
Additional Cel-Fi Antenna options are available at www.cel-fi.com/antennas
ACTION
Cel-Fi GO M is optimized for mobile
applications such as trucks, boats, and
RVs. It features the IntelliBoost™ technology
which allows it to automatically adjust to the
fast changing cellular network conditions
as you move. ONLY when the signal is poor,
FREQUENCY
will the Intelliboost maximizes gain while
698-960 // 1710-2700 MHz
BAND SUPPORT
boosting thus preventing any potential
2/4/5/12/13/28
SERVER
degradation of existing cellular service.
FREQUENCY
698-960 // 1710-2700 MHz
BAND SUPPORT
1/3/5/7/8/20
SERVER
FREQUENCY
698-960 // 1710-2700 MHz
BAND SUPPORT
1/3/5/7/8/20/2/4/5/12/13/28
SERVER
3
Included in the Mobile Kit (MK) version:
qsg_GO-M-Eng_17-0309
Cel-Fi GO M

Quick Start Guide

Smart Signal Booster
™
IN THE BOX
Power
Main Unit
Supply
IN THE MOBILE KIT
External Magnetic
Interior
Mount (Mag Mount)
Patch Server
Antenna
Antenna
(used as the donor)
www.cel-fi.com