Advertisement
Safety Precautions
• Use an appropriate low voltage power cable to
prevent fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the
camera. Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive
cleaning material. Please use a soft cloth to clean
the lens cover.
Installing the Camera
ATTENTION
- Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR or Observation System.
1. Mount the camera stand to the desired
mounting surface.
2. Attach the camera to the stand at either
of the two connection points at the back
of the camera.
Table Mount
Ceiling Mount
Wall Mount
Use the stand for ceiling, table or wall mounting.
Top Thread - Ceiling Mount
Bottom Thread - Table /
Wall Mount
Setting up the Camera
1. Connect the BNC connector of the camera
to the video cable.
2. DC Power—Power adapter: Connect a
12V DC power adapter** (included) to the
camera(s). Plug the power adapter into a
local power outlet.
**
A "4-in-1" power adapter that provides power to four cameras
may be substituted for four individual power adapters, depending on
product configuration.
4-in-1 Power Adapter**
Single Power Adapter
3. DC Power—Power Pigtail (not included):
Connect a Power Pigtail to each camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: The Power Pigtail is a non-polarity input. You can
connect the wires to either the positive or negative ports of
the DC power source.
Connection Diagram
ATTENTION
- This camera includes an Auto Mechanical IR Cut Filter.
When the camera changes between Day/Night viewing modes, an
audible clicking noise may be heard from the camera. This clicking is
normal, and indicates that the camera filter is working.
Camera Specifications
Image Sensor
1/3" Color Image Sensor
Video Format
NTSC
Effective Pixels
H: 720 V: 480
Horizontal Resolution
600 TVL
Scan System
2:1 Interlace
Sync System
Internal
S / N Ratio
48dB (AGC Off)
Iris
AES
AES Shutter Speed
1/60 ~ 1/25,000 sec.
Min. Illumination
0.1 LUX @ F2.4 (IR Off)
0 LUX (IR LEDs ON)
Video Output
Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type
3.6mm F2.0 / Fixed
FOV (Diagonal)
78°
Termination
Video: BNC Female
IR Range / Qty.
85ft / 26m; 18 LED's
Power Requirement
12V DC ± 10%
Power Consumption
12V: 300mA max
Operating Temp. Range
–22° ~ 122°F / –30° ~ 50°C
Environmental Rating
IP66
Dimensions (LxWxH)
4.2" x 2.6" x 5.2"
107mm x 66mm x 132mm
Weight (including stand)
0.6lbs / 0.3kg
Dimensions
66mm / 2.6"
132mm / 5.2"
107mm / 4.2"
Advertisement
