The Ix3M In Gauge Mode - Ratio Computers iX3M Easy User Manual

0
0
.0m :00
gAUgE
TIMER
AVg DEPTh
0 0
.0m :00
ASC MAx
TEMP
0.0 0.0
+20.3°C
b
C
RESET ThE AVERAgE
RESET ThE TIMER
DEPTh
(AVg DEPTh)
COM-
PASS

The iX3M in GAUGE mode

Use the Gauge mode as described in the example on the left.
ATTENTION: To use the iX3M in GAUGE mode an
adequate training is necessary!
To start the dive in GAUGE mode select the desired mode with button
the dive.
m
If you want that the iX3M recognize the GAUGE mode as default (and start the dive
in GAUGE mode even if we start diving with the computer switched off ) see the
DIVE SET section of this manual.
D
Do you know what?:
With the iX3M you can set the default mode that the device activates automatically when
entering water. See DIVE SET 1 on this manual
Do your know what?:
The iX3M calculates in background the tissue saturation and desaturation also in GAUGE mode
using a .fake Mix (10/60) with a high inert contents. This value is registered in the logbook.
If after a dive in GAUGE you want to to carry out a dive in OC using the iX3M decompressive
calculations, the iX3M will consider the new dive as the next repetitive of the day.
Well note:
Even if the iX3M carries out the decompressive calculation in background, they cannot be
visualized on the screen and they don't even affect the GAUGE mode.
D and start
65