b&c data system EzW User Manual page 34

Command: Get firmware version
Command code: <ESC> u
Hex code: 1B 75
Response: <ESC> [version]
Description: This command can get the firmware version of the EzWriter
* [Version String] is an 8-byte version number with format: "ID TECH MagStripe
Reader/Writer V1.0"
Command: Get IDT3840 compatible firmware version
Command code: <ESC> v
Hex code: 1B 76
Response: <ESC> [version]
Description: This command gets the original IDT3840 compatible firmware version. *
[Version String] is an 8-byte version number with format: "Rev.xx.xx"
Command: Set BPC
Command code: <ESC> o [tk1bit][tk2bit][tk3bit]
Hex code: 1B 6F [05-08][05-08][05-08]
Response: <ESC> 30 [tk1bit][tk2bit][tk3bit]
Description: This command is used to set the bit per character of every track.
Command: Set Hi-Co
Command code: <ESC> x
Hex code: 1B 78
Response: <ESC> 0
Description: This command is used to set the Reader/Writer status to write Hi-Co card
Command: Set Low-Co
Command code: <ESC> y
Hex code: 1B 79
Response: <ESC> 0
Description: This command is used to set EzWriter status to write Low-Co card
Command: Get Hi-Co or Low-Co status
Command code: <ESC> d
Hex code: 1B 64
Response: <ESC> H - to write Hi-Co
<ESC> L - to write Low-Co
Description: This command is used to get the Reader/Writer write status
B & C Data Systems * (541) 601-8282 * http://bcdata.com
34 of 42