Remington MB4020 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances,
Use and Care Guide especially when children are pres-
ent, basic safety precautions should
always be followed, including the
following:
MB4020, MB4040
READ ALL
INSTRUCTIONS
BEFORE USING.
DANGER
As with most electrical appliances,
electrical parts are electrically live
even when switch is off. To reduce
the risk of death by electric shock:
■ Do not reach for a trimmer that
has fallen into water. Unplug
REFRESH YOUR LOOK
immediately.
Scan the QR code to check ■ Do not use while bathing or in a
out our weekly man-style tip to shower.
keep you looking good! or visit
■ Do not place or store trimmer
RemingtonProducts.com/ManStyle
where it can fall or be pulled into a
Join us for special offers, grooming tips and product news.
tub or sink. Do not place in or drop
@RemReadyMan into water or other liquid.
■ Except when charging, always
Facebook.com/RemingtonReady
MB4040 (shown)
unplug this trimmer from the
electrical outlet immediately after
using.
Register Your New Product Today!
■ Unplug this trimmer before
By registering your new Remington ® product, you will receive these important benefits:
cleaning.
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
■ Do not use outdoors or ■ Keep trimmer out of extreme heat
operate where aerosol (spray) and cold. Product must be stored
products are being used or where at 0º F to 120º F.
oxygen is being administered.
■ Dispose of used batteries properly.
■ Do not use this trimmer with a Do not incinerate. Batteries may
damaged or broken cutting unit, explode if overheated. Do not wrap
as facial injury may occur. in metal or aluminum foil. Wrap in
WARNING
newspaper before discarding. It is
■ Always attach plug to trimmer,
suggested that you contact local
then adapter to outlet. To
town/city officials to determine
disconnect, turn all controls to OFF,
To reduce the risk of burns, fire,
proper battery redemption site(s)
then remove adapter from outlet,
electric shock or injury to persons:
in your area.
then detach power cord from the
■ Do not crush, disassemble, expose
trimmer for storage. ■ For household use only.
to excessive heat or incinerate the
■ Always store your trimmer
appliance.
and adapter in a moisture-free
■ Your trimmer should never be
area. Make sure the cord is
left unattended when plugged
disconnected from the trimmer.
in, except when charging your
rechargeable trimmer.
■ Close supervision is necessary
when this trimmer is used by, on,
or near children or persons with
certain disabilities.
■ Use this trimmer only for its
intended use as described
KEEP AWAY FROM ChILDREN
in this manual. Do not use
attachments not recommended
SAvE ThESE INSTRUCTIONS
by the manufacturer.
■ Keep the cord away from heated
surfaces.
■ Never operate this trimmer if it has
a damaged cord or if it is not
working properly, if it has been
dropped or damaged, or dropped
into water. Return the trimmer
to a service center for examination
and repair.
■ Never drop or insert any object into
any opening.
Product Features Before Using
Before Using Your Trimmer
Feature Checklist
1. On/Off Switch ■ Before using your trimmer for the
first time, charge the unit 24 hours
2. Zoom Wheel
for optimal performance.
3. Adjustable Comb 10
■ Make sure your face and facial hair
4. Power Port
are clean and dry.
5
5. Quick Release Button
6. Length Indicator
7. Charging Indicator
3
8. Goatee Blade
9. Stubble Blade (MB4040 only)
10. Beard Blade
Quick Release Blades
6
2
Quick Release Blades
■ The blade assembly can be
removed to change blades or for
easy cleaning.
■ To remove blade assembly, press
the Quick Release Button and pull
blade away from trimmer body.
1
8
7
4
9
Operating Your Trimmer
Charging/Recharging Rechargeable Operation
■ Double check that the Adjustable
Comb is the desired position.
To recharge this trimmer, use only (MB4040, MB4020)
Cutting length is visible in Length
the charging adapter provided. Plugging in the adapter cord will not
Indicator.
■ Turn the trimmer off. Insert the provide power to the trimmer, but
adapter plug into the Power Port, only recharge the batteries.
then plug the adapter into an
electric wall outlet. The Charging Zoom Wheel and Removable
Indicator will illuminate, indicating
Adjustable Comb
unit is charging. A full charge will
NOTE: Adjustable Comb must be
take approx. 3 – 5 hours for the
attached to the trimmer in order to
MB4040. A full charge will take
use the Zoom Wheel.
approximately 20 hours for the
The Zoom Wheel and Adjustable
MB4020.
Comb ensures precise trimming and
■ Your trimmer cannot be has nine adjustable positions:
overcharged. You may leave it
plugged in between uses. However,
Setting Beard Style Length
if the trimmer is not going to
1 Stubble look 1.5mm 1/16"
be used for an extended period 2 2.5mm 3/32"
■ To replace blade, align the guide (2 weeks), unplug the unit and 3 Short 4mm 5/32"
recharge when resuming use.
rails of the blade assembly with 4 5.5mm 13/64"
the slots on the trimmer body and ■ Charge the trimmer at 5 Medium 7mm 17/64"
snap into place. Make sure blade is 6 9mm 11/32"
temperatures between 40 – 90°F,
secure before turning on trimmer. 7 11mm 27/64"
to avoid adversely affecting battery
life. 8 Long 14mm 35/64"
9 18mm 45/64"
■ In order to preserve the life of
the batteries, they should be fully
discharged every six months and
then fully charged for 24 hours.
■ Li-Ion batteries included on the
MB4040. Nickel-Metal Hydrid
batteries included on the MB4020.
(see battery removal section for
proper disposal of batteries).
■ In cordless mode, your MB4040
trimmer will run for 120+ minutes
before additional charging is
required. The MB4020 will run for
approximately 40 minutes before
additional charging is required.
■ To adjust, roll the Zoom Wheel Adjustable Comb
toward the top of the trimmer for
Remove Adjustable Comb if you
a longer length, and toward the are: defining hairline edges such as
bottom of the trimmer for a shorter sideburns, trimming the nape of your
length. The wheel will click into
neck, trimming your beard line on
one of nine positions.
front of neck, or if you want to clean
cutter assembly.
■ Begin trimming at one of the
longest settings 8 or 9 to avoid
To remove:
accidentally trimming hair too
short. As you become familiar with
■ Be sure the trimmer is in OFF
the settings, you can then select position.
your desired length setting.
■ While holding trimmer in one hand,
and holding the Zoom Wheel to
prevent it from turning, gently pull
the Adjustable Comb away from
the trimmer. The comb
can be removed and replaced
on any setting.
To replace:
■ Be certain trimmer is in OFF
position.
■ While holding the trimmer in one
hand, and holding the Zoom Wheel
to prevent it from turning, slide the
comb over the top of the trimmer
until it "clicks" into position.
NOTE: The Adjustable Comb can only
be placed on the trimmer one way;
if it does not fit properly, remove and
reverse it.