Front Panel; Rear Panel - Cablesson 104026 User Manual

HDElity HDMI EDID reader/writer with HDCP support

Front Panel

1.
Mini-USB port : Connect to a PC for software operation
2.
HDMI IN : Connects to a HDMI source with a HDMI male-male cable
3.
MODE : Decide which mode 104026 is currently working at
0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output
1 = [Video] – supports up to HDMI 1.3 output. [Audio] – lock to stereo audio output
2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output
3 = [Video] – locks to HDMI 1.2 output. [Audio] – lock to stereo audio output
4 = [Video] – DVI display mode. [Audio] – no audio output
5 = [Safe Mode] – uses default EDID1 with video supported up to 1080p
6 = [Manual Mode] – Learning EDID from HDMI output manually
7 = [Serial Command Mode] – Software can access 104026 only in this mode

Rear Panel

4.
+5V DC : Connect to 5V DC power supply.
5.
LED INDICATOR:
[green]: signal indicator LED
[red]: power indicator LED.
6. HDMI OUT : Connect to a HDMI display with a HDMI male-male cable.
1
4 5 6
4
2 3