Redback A 4911 Operating Manual page 2

FRONT & REAR PANELS
1 DIP Switch
Used to select phantom power on/off, VOX muting on/off and 24V output on/off.
2 Auxiliary Input 2
A standard stereo RCA input for connection to an audio source.
3 Microphone Input 2
A balanced input for connection to balanced audio sources and microphones.
4 Auxiliary Input 1
A standard stereo RCA input for connection to an audio source.
5 Microphone Input 1
A balanced input for connection to balanced audio sources and microphones.
1 Volume 1 & 2
Adjusts output volume of each input.
2 VOX Sensitivity Adjustment
Adjusts the sensitivity of the VOX muting circuitry.
3 Auxiliary Output
A standard stereo RCA output for connection to an amplifier/pre-amp.
4 Microphone Output
A balanced output for connection to balanced input on an amplifier/pre-amp.
5 24V DC Output
This output is enabled when the DIP switch selection for 24V is in the on position.
6 24V DC Input
Provides power to the unit via 2.1mm DC jack.
2 Redback® Proudly Made In Australia
1 2 3
1 2
3
4 5
4 5 6
www.altronics.com.au