Elitech RC-4 Quick Start Manual

RC-4/RC-4HA/RC-4HC
Quick Start Guide
Software download: www.elitechlog.com/softwares
Install Battery
1.Use a proper tool (such as a coin) to loosen the
battery cover.
2.Install the battery with "+" side upward and keep
it under the metal connector.
3.Put the cover back and tighten the cover.
Note: Do not remove the battery when the logger
is running. Please change it when necessary.
1
Install Software
1.Please visit www.elitechlog.com/softwares. Select
and download the software.
2.Double click to open the zip file. Follow the
prompts to install it.
3.When the installation is completed, the ElitechLog
software will be ready to use.
Please disable the firewall or close the antivirus
software if necessary.
Start/Stop Logger
1.Connect the logger to a computer to sync the
logger time or configure parameters as needed.
2. Press and hold to start the logger until
shows. The logger starts logging.
3.Press and release to shift between display
interfaces.
4.Press and hold to stop the logger until
shows. The logger stops logging.
Please note all the recorded data cannot be
changed for security reasons.
2
Configure Software
1.Download Data: ElitechLog software will automatically
access the logger and download the recorded data
to local computer if it finds the logger is connected.
If not, manually click "Download Data" to download
the data.
2.Filter Data: Click "Filter Data" under Graph tab to
select and view your desired time range of the
data.
3.Export data: Click "Export Data" to save Excel/PDF
format files to local computer.
4.Configure options: Set logger time, log interval,
start delay, high/low limit, date / time format, email
etc. (Check User Manual for default parameters).
Note: New configuration will initialize previous
recorded data. Please make sure to back up all
necessary data before you apply new
configurations.
Refer to "Help" for more advanced functions. More
product information are available on the company
website www.elitechlog.com.
3
4