Advertisement
Quick Links
NCM-OR-200
4 Channels Optical Receiver
Shipping
NCM OPTICS inspects and carefully packs all equipment before shipment. NCM-OR-200 are
completely manufactured and tested by NCM OPTICS.
NCM-OR-200 includes:
NCM-OR-200 (1)
1-
2- AC Power Cord (1)
3- Keys (2)
4- Datasheet (1)
6- Installation Guide (1)
Installation Guide
MADE IN USA
8125 NW 64th Street, Miami, Florida 33166
2101 N.W. 79 Ave. Miami, Florida 33122
Phone: 305-640-0461 Fax: 305-639-2684
ncm@ncmsupplies.com
NCM Supplies Inc.
|
www.ncmsupplies.com
1
Advertisement
Summary of Contents for NCM NCM-OR-200
-
Page 1: Installation Guide
NCM-OR-200 4 Channels Optical Receiver Installation Guide Shipping NCM OPTICS inspects and carefully packs all equipment before shipment. NCM-OR-200 are completely manufactured and tested by NCM OPTICS. NCM-OR-200 includes: NCM-OR-200 (1) 2- AC Power Cord (1) 3- Keys (2) 4- Datasheet (1) 6- Installation Guide (1) NCM Supplies Inc. -
Page 2: Front Panel
RF-OUT RF-TP RF-OUT RF-OUT MONITORING -20dB -20dB -20dB -20dB INTERFACE 110-220 Vac/ 50-60 Hz NCM Supplies Inc. 8125 NW 64th Street, Miami, Florida 33166 2101 N.W. 79 Ave. Miami, Florida 33122 Phone: 305-640-0461 Fax: 305-639-2684 MADE IN USA ncm@ncmsupplies.com www.ncmsupplies.com... - Page 3 The laser can cause serious eye damage.) Connect the AC power cord into the power jack and ground GND both on the rear panel of NCM- OR-200. With the Power Key off, wait until RF LED and PD LED (on front panel) blinks. Display...
- Page 4 When the start process finishes, the main display is shown. The main display has the status information of the NCM-OR-200. If there is no RF alarm, then the RF LED lights up green. If RF LED lights up red that means one or more output RF level is out of range. If no optical input alarm, the PD LED lights up green.
- Page 5 --> O:<0.1mW R:<20dBmV To navigate from main display and to monitor the general status of the NCM-OR-200, push the “F” button. The picture shows the general information display.(Warning: While the monitor is navigating the serial RS-232 is stopped.) NCM-OR-200 Ver:1.0 SN: 123456 NCM Supplies Inc.
- Page 6 None installed(default) Fan Current 67.00 mA TEC Current 265.00 mA Fan Current No Installed NCM Supplies Inc. 8125 NW 64th Street, Miami, Florida 33166 2101 N.W. 79 Ave. Miami, Florida 33122 Phone: 305-640-0461 Fax: 305-639-2684 MADE IN USA ncm@ncmsupplies.com www.ncmsupplies.com...
- Page 7 LCD backlight on and Power LED/RF LED/LD LED light up solid green: NCM-OR-200 is turned on and works correctly. LCD backlight blinking and RF LED or LD LED light up solid red: NCM-OR-200 is turned on and has alarm condition.