Charging The Battery - RE-TIMER User Manual

Setting up your device

Charging the battery

Follow these steps to charge your device:
1) Plug the charging cable into the USB
port of your Re-Timer (Diagram 1, a).
2) Plug the opposite end of the charging
cable into either your computer's USB
port or a USB wall adapter (not supplied).
As the battery charges, the LED Battery Indication
Light will light up on the display (Diagram 2, b).
When the battery is full, the LED will stop glowing.
If the battery is completely empty it will
take up to 3.5 hours to charge.